Semi Offline Fabric Dust Collector
Like the Semi Off-Line Cartridge Dust collectors, the Semi Off-Line Fabric Dust Collectors are equally effective in dust collection. In fact, the functions of both these systems are also much similar. These dust collectors are generally classified on the basis of clean air site. These dust collectors have pneumatic controlled dampers placed on clean air outlets, which are used to end the flow of clean air from compartments.
Moreover, each of the different compartments is fitted with pulse valves. These pulse valves provide the compressed air needed to direct the pulsing air into the blowpipes in the compartments. While the cleaning process takes place, the inlet pneumatic damper gets closed thereby stopping the flow of air across the compartment. The pulse valves then opens in few seconds and supplies a surge of air for cleaning the fabric dust collector.
During this process, the compartment remains semi off-line for about 40 seconds. However, this time period can be short or even lengthy. Once the cleaning process is over, the inlet pneumatic damper reopens and the compartment also comes back on stream or online.
Aimed and built at handling large gas materials and tough dust
Sequentially, the other compartments are also cleaned till all the fabrics in the dust collector are cleaned. The duration of this cleaning cycle, which is called as semi off-line cleaning, lasts for about 80 seconds.
The Semi Off-Line Fabric Dust Collector is a commendable dust collector known for its high-efficiency filtration of gases during industrial processes.
Being a very effective semi ‘off-line’ cleaning, it easily surpasses the most rigorous environmental requirements. Additionally, it also offers excellent accessibility and reliability.
These dust collectors are aimed at handling large gas materials and tough dust. Moreover, they are flexible as well as economical to operate. These Fabric Dust Collectors fulfils most performance requirements in terms of economy and reliability.
– Operating temperature standard up 35,6 to 203°F. Spec. -58 to 500°F
- FAM Parts
- Stainless Steel